Food Packaging Machine Brushless Servo Drive 500W EP1C Series
EP1C series AC Servo Driver adopts advanced control algorithm and
intelligent power module (IPM), which could realize precise digital
control on position. Designed on the basis of EP1 series, functions
of external brake resistor , DC Reactor terminals and USB
communication interfaces are added. As a result, power section has
become more complement whose range is from 500w to 5.5kw at present
and supports full-closed loop control.
1. There are two kinds servo drive in this series. One is named
EP1C, the other is named EP1C-A. The difference is only on control
mode. EP1C has only position mode, while EP1C-A has position, speed
and torque mode.
2. ServoSoft Software is offered to do parameter read and parameter
download by connecting drive USB communication interface and PC.
Also it supports real-time wave recording and online debugging.
3. Built-in automatic high-frequency resonance suppression: two
auto notch filters are provided to suppress the mechanical
4. Optional extra brake resistor.
5. Full digital control with easy and flexible operation.
6. Supreme overload ability with capacity of triple rated torque.
|Input power||3-phase AC220V -15% ～ +10% 50/60Hz|
|Environment||Temperature||Working: 0℃ ～ 40℃ Storing: -40℃ ～ 50℃|
|Humidity||Working:40% ～ 80%(non condensing) Storing:below 93%(non condensing)|
|Atmospheric Pressure||86kPa ～ 106 kPa|
|Control Mode||Vector control|
|Feedback Mode||2500 line incremental encoder,encoder with fewer lines|
|Control Mode||Position, speed and torque|
|Digital Input||5 Programmable input terminals(Optical Isolation) Function SRVON
,ACLR ,CW Drive inhibition,CCW Drive inhibition,CW Torque
inhibition, CCW Torque inhibition,Emergency Stop,Electronic gear
selection 1,electronic gear selection2,Position deviation
clear,pulse input inhibition|
|Digital Output||3 Programmable input terminals(Optical Isolation)
Function:SRDY,alarm,Finish Orientation Output,Reach
Speed,electro-magnetic brake,Torque restrictions|
|Signal Output of Encoder||Signal Types:A,B,Z Differential output,Z signal open-collector
|Position||Input Frequency||Differential input:≤500kHz(kpps), single-ended input:≤200kHz(kpps)|
|Instruction mode||Pulse+Signal,CCW Pulse/CW Pulse, orthogonal Pulse|
|Electronic Gear Ratio||1 ～ 32767/1 ～ 32767|
|Speed||Analog command input||-10V～+10V,Input impedance 10kΩ|
|Acceleration/deceleration command||Parameter setting|
|Command source||Analog quantity|
|Torque||Analog command input||-10V～+10V,Input impedance 10kΩ|
|Speed limit||Parameter setting|
|Command source||Analog quantity|
|Surveillance Function||Revolving Speed,Current Position,Positional Deviation,Motor
Torque,Motor Current,Instructions Pulse Frequency,busbar
voltage,internal temperature of module etc.|
|Defensive function||Overspeed, Overvoltage,Overcurrent,Overload,Abnormal of main
Power,Abnormal Encoder,out of tolerance etc.|
|Feature||Speed Frequency Response||≥300Hz|
|Speed Fluctuation Rate||＜±0.03%(load 0 ～ 100%); ＜±0.02%(power-15% ～ +10%)|
Computer numerical control machine tools
Food Packaging Machine
Cotton spinning equipment
Transparent film wrapping machine
Circular knitting machine
Flame cutting machine
Other industrial automation fields
• Energy management - Masolutions, and renewable energy
• Profession - Maxsine has focused only on servo products for about
19 years, not any other products.
• Delivery - By reliable International delivery company. Maxsine
offers flexible and low cost
delivery solution for clients.
1. Q: Can you produce products according to our requirements?
A: Yes, Maxsine can do customized products according to your
detailed requirements if it is not our
2. Q: Do you have the products in stock?
A: The best-selling products are usually in stock. But the stock
quantity is changing continuously. Thus
please confirm with sales before making order.
3. Q: What’s the delivery time?
A: If the models you order are in stock, Maxsine could deliver in 1
working day after 100% payment
received. If not in stock, Maxsine will deliver in 7 working days
after 100% payment received.
4. Q: Will you deliver the right goods as ordered? How can I trust
A: Yes, we will. You can find the factory check report from the
third-party company in our website. Maxsine
company really exists and provides servo motor and servo drive to
customers from all over the world on
and on. And we can offer goods photos before delivery.