Winding Machine 1.5kw Speed Digital Servo Drive Brake Resistor
There are 16 models in this series with power range from 0.1kw to
7.5kw. EP1C PLUS is the fifth generation of Maxsine servo drive.
This high-speed and high-precision servo drive is widely used in
industrial automatic field.
1. EP1C Plus Series software compensates torque ripple, to
effectively improve the torque accuracy.
2. Differential drive connection can support 1M pulse input /
single-ended drive optional (convenient for PLC connection). Both
instruction input and feedback output frequency can reach 1Mpps,
which can achieve high resolution running. Special order version
supports 24V NPN/PNP single-ended drive with the highest frequency
3. Set notch filter, which can greatly reduce the noise and
vibration caused by mechanical resonance of the device, to achieve
quick response action. There are 2 notch filters to set the
frequency of 50~1500Hz, which can be done a deep adjustment.
4. Control Model: Position, speed, torque, speed trial run, and JOG
5. Optional incremental encoder, wire-saving encoder, absolute
encoder and resolver.
6. Strong protection function, abundant control models and higher
|Input power supply||Three-phase AC 220V -15%～+10% 50/60Hz|
Storage:93% or less(non-condensing)
|Control of main circuit||vector control|
|Control modes||Position, Speed, Torque|
|Digital inputs||Five programmable input terminals (optical isolation)Function SRVON
,ACLR ,CW Drive inhibition,CCW Drive inhibition,CW Torque
inhibition, CCW Torque inhibition,Emergency Stop,Electronic gear
selection 1,electronic gear selection2,Position deviation
clear,pulse input inhibition|
|Digital outputs||3 Programmable input terminals(Optical Isolation)
Function:SRDY,alarm,Finish Orientation Output,Reach
Speed,electro-magnetic brake,Torque restrictions|
|Encoder signal outputs||A,B,Z Differential output,Z signal open-collector output|
|Position||Input frequency||differential input:≤1000kHz(kpps), single-ended input:≤200kHz(kpps)|
|Command modes||Pulse+Signal,CCW Pulse/CW Pulse, orthogonal Pulse|
|Electronic gear ratio||1～32767/1～32767|
|Speed||Analog command input||-10V～+10V, Input impedance10kΩ|
|Acceleration/deceleration command||Parameter setting|
|Command source||Analog quantity|
|Torque||Analog command input||-10V～+10V,Input impedance 10kΩ|
|Speed limit||Parameter setting|
|Command source||Analog quantity|
|Monitor function||Revolving Speed,Current Position,Positional Deviation,Motor
Torque,Motor Current,Instructions Pulse Frequency,busbar
voltage,internal temperature of module etc.|
|Protection function||Overspeed, Overvoltage,Overcurrent,Overload,Abnormal of main
Power,Abnormal Encoder,out of tolerance etc.|
Computer numerical control machine tools
Cotton spinning equipment
Vacuum packaging machine
Two-color offset press machine
Flame cutting machine
Other industrial automation fields
• Products - Maxsine people have specialized in doing SERVO CONTROL
for 18 years.
• Company-Maxsine is the first manufacturer of servo drive in
• Delivery - By reliable International delivery company. Maxsine
offers flexible and low cost
delivery solution for clients.
1. Q: Can you produce products according to our requirements?
A: Yes, Maxsine can do customized products according to your
detailed requirements if it is not our
2. Q: Do you have the products in stock?
A: The best-selling products are usually in stock. But the stock
quantity is changing continuously. Thus
please confirm with sales before making order.
3. Q: What’s the delivery time?
A: If the models you order are in stock, Maxsine could deliver in 1
working day after 100% payment
received. If not in stock, Maxsine will deliver in 7 working days
after 100% payment received.
4. Q: Will you deliver the right goods as ordered? How can I trust
A: Yes, we will. You can find the factory check report from the
third-party company in our website. Maxsine
company really exists and provides servo motor and servo drive to
customers from all over the world on
and on. And we can offer goods photos before delivery.