Roving Frame 200W Single Phase Servo Motor Drive With Parameter
There are 16 models in this series with power range from 0.1kw to
7.5kw. EP1C PLUS is the fifth generation of Maxsine servo drive. It
is high-speed and high-precision servo drive which is widely used
in industrial automatic field.
1. EP1C Plus Series software compensates torque ripple, to
effectively improve the torque accuracy.
2. Speed response bandwidth is 1.2kHz. High response control based
on the torque feed forward, can reduce the response delay and make
position setting time optimal up to 1ms.
3. It supports to match Maxsine servo motor with 23 bit incremental
or absolute encoder by independent R&D. The encoder resolution
reaches 8,388,608 pulses per turn.
4. Power Voltage: single phase AC 220V±15% / 3 phase AC 220V±15%.
5. Control Model: Position, speed, torque, speed trial run, and JOG
6. Built-in regenerative brake.
|Input power supply||Single phase AC220V -15%～+10% 50/60Hz|
Storage:93% or less(non-condensing)
|Control of main circuit||vector control|
|Control modes||Position, Speed, Torque|
|Digital inputs||Five programmable input terminals (optical isolation)Function SRVON
,ACLR ,CW Drive inhibition,CCW Drive inhibition,CW Torque
inhibition, CCW Torque inhibition,Emergency Stop,Electronic gear
selection 1,electronic gear selection2,Position deviation
clear,pulse input inhibition|
|Digital outputs||3 Programmable input terminals(Optical Isolation)
Function:SRDY,alarm,Finish Orientation Output,Reach
Speed,electro-magnetic brake,Torque restrictions|
|Encoder signal outputs||A,B,Z Differential output,Z signal open-collector output|
|Position||Input frequency||differential input:≤1000kHz(kpps), single-ended input:≤200kHz(kpps)|
|Command modes||Pulse+Signal,CCW Pulse/CW Pulse, orthogonal Pulse|
|Electronic gear ratio||1～32767/1～32767|
|Speed||Analog command input||-10V～+10V, Input impedance10kΩ|
|Acceleration/deceleration command||Parameter setting|
|Command source||Analog quantity|
|Torque||Analog command input||-10V～+10V,Input impedance 10kΩ|
|Speed limit||Parameter setting|
|Command source||Analog quantity|
|Monitor function||Revolving Speed,Current Position,Positional Deviation,Motor
Torque,Motor Current,Instructions Pulse Frequency,busbar
voltage,internal temperature of module etc.|
|Protection function||Overspeed, Overvoltage,Overcurrent,Overload,Abnormal of main
Power,Abnormal Encoder,out of tolerance etc.|
Computer numerical control machine tools
The Roving Frame
winding and twisting machine
Transparent film wrapping machine
multicolor printing machine
Flame cutting machine
Other industrial automation fields
• IQC: take strict quality inspection for every income components,
to ensure every income components are qualified.
• Aging test: make the frequency inverters at run status, put them
in the aging test house at 50°C for 48 hours, to remove every
• Load test: the last and the most important test, add different
load to the drives, test their input and output value, to check
their working performance. unqualified products will be removed
from the team.
1. Q: Can you produce products according to our requirements?
A: Yes, Maxsine can do customized products according to your
detailed requirements if it is not our
2. Q: Do you have the products in stock?
A: The best-selling products are usually in stock. But the stock
quantity is changing continuously. Thus
please confirm with sales before making order.
3. Q: What’s the delivery time?
A: If the models you order are in stock, Maxsine could deliver in 1
working day after 100% payment
received. If not in stock, Maxsine will deliver in 7 working days
after 100% payment received.
4. Q: Will you deliver the right goods as ordered? How can I trust
A: Yes, we will. You can find the factory check report from the
third-party company in our website. Maxsine
company really exists and provides servo motor and servo drive to
customers from all over the world on
and on. And we can offer goods photos before delivery.